We use an advanced laser 3D Scanner for generating the As Built data. Our 3D scanners provides our Naval architects and Structural...

3D laser scanning has revolutionized ship verification and design, providing a more accurate and efficient approach compared to...

Installing a BWTS on a ship is a complex task that demands careful attention to detail and precision. For effective planning and...

The use of laser scanning in shipbuilding is a technology that helps shipyards deliver projects faster, more efficiently and with less...

The key to competitive utilization lies in being able to 3D capture the vessel "in operation" quickly, accurately and inexpensively. The...

Laser scanning is accurate and thorough, being usable throughout every stage of the retrofitting process, including the initial...

Our extremely fast measurement process and offers an accurate 3D scan of the network pumps and pipes critical to the BWTS (Ballast Water...

Laser scanning provide the ability to capture data in the dark. Even in the dimly lit areas of the Ballast Tanks, the scanner perform...

Our marine laser scanning projects for Balast Water Treatment System (BWTS) for retrofit typically follows the steps shown below: 1....

Our 3D scanning is a developing tool that is increasingly used in the maritime industry and allows to get a very accurate “as build” of...

Typically, the ballast water treatment system BWTS goes into the engine room or pump room of a ship. The installation of a new and large...

In principle, it will be helpful to know the exact purpose of the laser scan in advance, as the accuracy of a 3D laser scan can vary...

We offer a 3D laser scanning service to help owners and shipyards stay ahead of the market, plan the project, design the overhaul, and...

The use of laser scanning in shipbuilding is a technology that helps shipyards deliver projects faster, more efficiently, and with less...

Laser scanning is accurate and thorough, being usable throughout every stage of the retrofitting process, including the initial...

The typical approach when performing ship checks is to bring designers and/or engineers on board where, using tape measures, they record...

In earlier times, a design engineer on board uses tapes to measure and records the measurements of the existing systems, spaces...

Scanphase offers an extremely fast measurement process and offers an accurate 3D scan of the network pumps and pipes critical to the BWT...

The BWM (Ballast Water Management) Convention entered into force on September 8, 2017 and according to it, all ships in international...